The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**leddzepp** · 06-11-2009, 05:39 PM

Can't find the info in FAQ. Got a tach harness, and no instructions came with it. It plugs into the back of the tach, has a pink wire (power) and a brown wire (coil) Where on the coil do I connect the brown wire? Pos side or Neg side? DO I need a ground wire also? Thanks. This is for non-HEI, factory ignition...otherwise the wire just goes to "tach" on the cap!

06-11-2009, 05:39 PM	#1
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	How Do I wire a Factory Tach? Can't find the info in FAQ. Got a tach harness, and no instructions came with it. It plugs into the back of the tach, has a pink wire (power) and a brown wire (coil) Where on the coil do I connect the brown wire? Pos side or Neg side? DO I need a ground wire also? Thanks. This is for non-HEI, factory ignition...otherwise the wire just goes to "tach" on the cap! Last edited by leddzepp; 06-11-2009 at 05:41 PM.