|
Re: bbc opinions
Find a good Mark IV block, 2-bolt is fine. Get it cleaned up and see what size pistons you need. Then get a 496 rotating assembly. Look for forged pistons that will allow you to get to 9.5:1 static compression with open chamber heads. Then get some 781 or 049 heads and put 2.19/1.88 valves in them and pocket port. Grab an RPM intake and a 750 vacuum secondary carb. Use a Lunati Voodoo cam with 230ish intake duration and a set of 1-3/4" headers. Simple 500HP and 500lbs of torque.
__________________
- Greg
|