|
Re: Clutch problem
bleed it first then do the other afterwards. just like the brakes have to be bled before you get a pedal. the linkage parts need to be replcad if you have some good ones around but that is unlikely. next step is to weld up where it has worn down and clean it back to irig shape and size. holes can be drilled out to take a new round blank, weld it in and clean up the weld and then drill a new hole. then adj the slave cyl pushrod to take up the rest of the slack, about 3/4" free play on top of the pedal.
that spring and linkage has been in there and doing the job for almost 50 years so is the spring getting stronger and overpowering the rest of it? no. just think about it
ron
|