The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

neonlarry · 06-27-2009, 11:39 AM

Have you checked to see if the rotor contact is making good contact with the button on the cap? If not put a dab of dielectric grease on the rotor contact and install the cap, then remove and check to see that the impression in the grease goes all the way to the metal of the contact.
Also check all your grounds carefully (shiny metal to shiny metal).

06-27-2009, 11:39 AM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Re: Distributor Problems Have you checked to see if the rotor contact is making good contact with the button on the cap? If not put a dab of dielectric grease on the rotor contact and install the cap, then remove and check to see that the impression in the grease goes all the way to the metal of the contact. Also check all your grounds carefully (shiny metal to shiny metal). __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI