The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 03-30-2003, 10:07 AM

I have thought about using a dimmer switch in the upper part of the floor board. You could leave the factory switch alone and just put the dimmer inline from the ground and when you want it to come on just stomp on it. The switch not the gas.... you could use it for anything, even a starter button if you wanted. I'm sure there is some electrical questions to look at, but it's a idea.

03-30-2003, 10:07 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Just a thought I have thought about using a dimmer switch in the upper part of the floor board. You could leave the factory switch alone and just put the dimmer inline from the ground and when you want it to come on just stomp on it. The switch not the gas.... you could use it for anything, even a starter button if you wanted. I'm sure there is some electrical questions to look at, but it's a idea. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.