[rfmaster]

I have used WinALDL extensively in the past - it is some what primitive, but it does the job. I use Tuner PRO -RT for bin file editing (aka tuning) I have not used it for data capture since I have modified my ECM with EBL conversion. EBL - that's another discussion all together.

In your case capture the standard data stream which should contain the following critical sensor data:

SENSOR:IAC
SENSOR:Coolant Temp
SENSOR:SPEED
SENSOR:MAP
SENSOR:RPM
SENSOR:TPS
SENSOR:INT
SENSOR:O2
SENSOR:Battery Voltage
SENSOR:Knock counter
SENSOR:BLM
SENSOR:rich / lean counter

You'll have to define data log file see below:



Define file for capture (Select Log File For Rec/Play)