The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 07-10-2009, 12:30 PM

Scoti, I have a pair of Early Classic 2.5 inch spindles. They are for 63-70 ball joints and tie rod ends. They have the ECE 5 lug rotors, bearings, calipers, and hoses. I bought them new from ECE and used them for 4 years on my stepside truck before I parted it out.

I'd go 225 for the whole deal. I work in Hurst, so the drive wouldn't be too bad.

07-10-2009, 12:30 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: WTB: Dropped Spindles Scoti, I have a pair of Early Classic 2.5 inch spindles. They are for 63-70 ball joints and tie rod ends. They have the ECE 5 lug rotors, bearings, calipers, and hoses. I bought them new from ECE and used them for 4 years on my stepside truck before I parted it out. I'd go 225 for the whole deal. I work in Hurst, so the drive wouldn't be too bad. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin Last edited by Tx Firefighter; 07-10-2009 at 12:35 PM.