The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

smashingchuck · 07-13-2009, 10:27 AM

I have found that drilling them is the fastest way for me. Use a center punch to get started, I usually start with a 3/16" drill then go with the 3/8". Also use lots of tap magic.

07-13-2009, 10:27 AM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Best way to remove stock frame rivets? I have found that drilling them is the fastest way for me. Use a center punch to get started, I usually start with a 3/16" drill then go with the 3/8". Also use lots of tap magic. __________________ 78 Build Thread 4Runner Build