The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ol Curt · 07-20-2009, 10:49 AM

"that´s really simple , put the tank under the frame , put the metal straps in place and bolt on the straps on the left side of the frame , on the right side of the frame drill two holes in the underside of the frame , drill upside two larger holes in the frame (see pic #2,it shows the passenger side with the two larger holes), put the bolt from the straps thru the frame on the right side and put the fasteners thru the frame on the bolts ! DONE!!!!!!"

Huh?

I think I need to see a close up of the bolts/holes!

07-20-2009, 10:49 AM	#10
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: LMC rear gas tank install "that´s really simple , put the tank under the frame , put the metal straps in place and bolt on the straps on the left side of the frame , on the right side of the frame drill two holes in the underside of the frame , drill upside two larger holes in the frame (see pic #2,it shows the passenger side with the two larger holes), put the bolt from the straps thru the frame on the right side and put the fasteners thru the frame on the bolts ! DONE!!!!!!" Huh? I think I need to see a close up of the bolts/holes! __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down! Last edited by ol Curt; 07-20-2009 at 10:50 AM.