[SCOTI]

Originally Posted by Ryan6838

I picked up some spindles, calipers and disks of a 73-87 pickup. What parts do i need to make them work on my 68 c10? I heard that i can use my arms i just need a few parts.

• Lower BJ's for a 73-87

• Upper BJ's for 73-87

• Draglink & tie rods from a 73-87 or tie-rod to spindle adapters

• Master cyl from a 71-80

• pwr booster from a 71-72 (if power brakes)

• Prop valve from a disc brake equipped truck: 71-72 (if mounting @ the master cyl) or 73-80 (if mounting @ the splash apron in the engine compartment)

• Hard brake lines from a disc brake equipped truck: 71-72 (if mounting @ the master cyl) or 73-80 (if mounting @ the splash apron in the engine compartment)

• The brake 'push' rod that connects the pedal to the pivot linkage on the firewall may need to be extended (my manual drum brake 68 required extending the rod when I swapped to 73-80 power discs)