The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

TopFuel1966 · 07-26-2009, 11:01 PM

If your rubber is old and dry like mine the trim will come out fairly easy without removing the glass. I cut the rubber on both sides of the trim with a sharp box knife. After removing the rubber from the outside edge of the trim and sliding the connector clips to the side of the joints I was able to pry up VERY CAREFULLY on each of the four sections of the trim. They came out with absolutely no damage. Just take it nice and slow.

07-26-2009, 11:01 PM	#9
TopFuel1966 Registered User Join Date: Jul 2009 Location: Menifee, CA Posts: 471	Re: Another what's it worth... If your rubber is old and dry like mine the trim will come out fairly easy without removing the glass. I cut the rubber on both sides of the trim with a sharp box knife. After removing the rubber from the outside edge of the trim and sliding the connector clips to the side of the joints I was able to pry up *VERY CAREFULLY* on each of the four sections of the trim. They came out with absolutely no damage. Just take it nice and slow.