The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Fred T · 08-04-2009, 01:23 PM

The radiator for the big truck is taller and thicker. It will clear the hood, but requires the flange on the splash pan to be moved forward for clearance. Also, the brace across the front at the top of the radiator needs cut. On my friend's truck the brace was cut out completely. It could be trimmed, leaving just the lowest part of the brace.

08-04-2009, 01:23 PM	#3
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Radiator support interchange? The radiator for the big truck is taller and thicker. It will clear the hood, but requires the flange on the splash pan to be moved forward for clearance. Also, the brace across the front at the top of the radiator needs cut. On my friend's truck the brace was cut out completely. It could be trimmed, leaving just the lowest part of the brace. __________________ Fred There is no such thing as too much cam...just not enough engine.