Quote:
Originally Posted by yellowGT
you mind posting up dimensions on that plate...im thinking about making my own too.
|
I assume you mean the flip bracket...right? Okay, I used 2"x3/8" material. The bracket is 3.54" tall, 4.1" inside to inside, and 4.85" outside to outside. The 3/4" hole is moved 1" from center on the lower "flat" to accomodate for driveline changes.
If you need me to be more specific I can, but this is kinda the measurements that I went with and it fits perfectly on my '87 rear, but I ended up going with a '96 rear and the brackets don't fit it
