|
Re: stereo install in 73
you dont need a "kit"
you need the following
stereo complete with harness (just for the stereo)
inline blade fuse holder (OR use the factory "extra" slots in your fuze block)
some t splices
a roll of 12-14 gauge speaker wire
a few solid splices (aka straight splices etc..)
some speakers
and a self tapping screw for your ground
instructions..
find location for your radio(head unit)
mount etc head unit to ensure proper fitting and appearance
remove head unit and install the security plate (it's the metal rectangle around your radio itself)
then find a "constant hot" wire.. that will be for your "memory wire" (usually a cigarette lighter hot will work)
find an IGN hot wire (this is pretty much any accesory that turns on when the truck does... but you can also use the fuze block which is a much cleaner install)
tap with the sheetmetal screw and secure a good ground
then run and connect your speaker wires to the locations you desire
connect all together (each and every wire on the radio is marked, and if not the identification pictures are commonly available on the internet)
then turn on stereo ..
enjoy music..
easy as pie
|