The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Any one with some Experience using Color Bond Products

ECU PIRATE · 08-25-2009, 12:19 PM

I am just about to start refinishing all of my interior plastic trim and dash to match the saddle bucket seats and console I pirated from an 80' Suburban. Do any of you members have experience using the Color Bond products from LMC? I am just wondering if there is a product that is just as good and available from the local auto parts store or a Home Depot or Lowes?? Also looking to re-spray all of the interior moldings associated with a headliner, I acquired from a late 70's Siverado Big 10........

Thanks,

Mike

08-25-2009, 12:19 PM	#1
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Any one with some Experience using Color Bond Products I am just about to start refinishing all of my interior plastic trim and dash to match the saddle bucket seats and console I pirated from an 80' Suburban. Do any of you members have experience using the Color Bond products from LMC? I am just wondering if there is a product that is just as good and available from the local auto parts store or a Home Depot or Lowes?? Also looking to re-spray all of the interior moldings associated with a headliner, I acquired from a late 70's Siverado Big 10........ Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)