|
Re: Cooling Issues
Thanks for all the feed back guys. . just to go over some things, the fan shroud is the correct one for the truck/radiator and the fan that is on it stuffs this shroud. its about half way in the shroud and half way out. "perfect according to the mechanic" i recently blew up the motor due to heat when the stock gauge went out and was reading normal. so i replaced the motor, flushed the radiator and made sure that the water pump was working and put the new gauge in. so im thinkin go back to the 180 degree T-stat at least? and i will check the coolant to make sure i have the right fluids in it. anything else i should be on the look out for or that i missed? thanks again everyone, Mark
|