[rfmaster]

Originally Posted by mcbassin

RF,
What would you suggest doing with the vss? I guess I need to get the aluminum housing you spoke of and the inline electronic vss? Any idea what part numbers? thanks,
Mike

Mike

You'll need the following:

Speedometer Driven Gear (43)
Speedometer Housing & Support Bracket (44)
Speedometer Housing O-Ring (42)
http://www.tcsproducts.com/images/st..._schematic.pdf

All three items can be sourced from JY. The only catch is get a correct driven gear that gets speedometer cable to turn at 1000 tire revs/mile - this is straight forward and several handy references are availlable. The following links are will provide you with a good reference information:

Look for part # 54 (P)

http://www.partshp.com/speedometer_gears.htm
and
http://www.73-87.com/7387garage/drivetrain/speedo.htm

VSS
I think I covered this subject extensively in prior posting.

Attached photos capture my setup - I run this my conversion. That yellow module is a JTR 2000PPM TBI VSS bolted to speedometer housing and speedometer cable is bolted into VSS output. Photos were taken at an awkward angle - sorry.


//RF