The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Burt4x4 · 09-01-2009, 10:23 AM

My gallery is down at the moment so no pics to share...

I used 2x3 square tubing. But I removed both outer and inner rockers(rusted) and welded the tubing directly to the rocker box and body pillers....basically cut out a spot, floor jacked up the tubing welded it in place

09-01-2009, 10:23 AM	#4
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: slider bar/ additional jack point My gallery is down at the moment so no pics to share... I used 2x3 square tubing. But I removed both outer and inner rockers(rusted) and welded the tubing directly to the rocker box and body pillers....basically cut out a spot, floor jacked up the tubing welded it in place __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks