|
Re: Trans lines
It is a good idea to use metal lines as much as possible. Cooler lines are not under a lot of pressure so it is easy to make them yourself. Use flares going into the trans, and run the lines with some protection, as it will bleed out quick if you get a knick, and then you will be going no where. You can use flares into the radiator, but there is nothing wrong with a little hose as it also helps with vibration. If you are using a seperate cooler, make sure it is in a protected area, and that there is good air flow, you may even consider using an electric fan with it if you do alot of stop and go driving.
|