|
I believe I understood your question...if I have not ignore what I am about to say.
As was explained to me by XXL...I hope he does not mind me quoting him...
"As for a solid 12 volt source, there isn't one that big in the factory fuse panel. You'll want to run one from the battery. Make sure you use a good 12 gauge or bigger wire, fuse it AT THE BATTERY, and use grommets when going through sheetmetal. If you plan to have other accessories that require power, you may want to bring the battery lead in and create a "bus" with it. That way you can just tap that connection any time you need battery power. "
Hope this helps...
|