|
Re: Yet Another s10 swap
Quote:
Originally Posted by jeffs51chevy
c10addict,
Thanks again. One piece of advice I would give is to leave the front clip attached to the cab if at all possible. I did not have the facilities to lift and move the whole front end, but it would have helped tons with alignment issues. Just remove the inner fender wells, trim the radiator core support, and you will find it much easier to get it all lined up.
Good Luck,
Jeff
|
Thank You Jeff!!!! I will leave everything bolted and get a bunch of friends lined up.. I just noticed that I actually welded the top plate on the rear mount the wrong way... Oops... Looks like I have to cut it off and make a new one!  I get carried away with my welds 
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08
67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast.
64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten..
54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread...
07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind..
http://67-72chevytrucks.com/vboard/s...d.php?t=339340
See pics of my trucks in my profile
|