|
Re: Torque Converter Lockup.
Quote:
Originally Posted by kenm78
According to my vacuum chart there is a transmission lockup converter vacuum switch. I am thinking this is supposed to lock up my converter when It needs to. Well unfortunately when I bought it I found a toggle switch and I manually have to turn the lock up on and off. Gets old after a few times. Does anyone know where this switch might be located, or have a picture of what it looks like? I would like to try to get it working so I don't have to flip the switch every time.
|
700R4?
I'm wondering if the PO installed a "Lock Up" kit from TCI. If so,you could re-wire the toggle switch to a switch similar to a brake light switch. The new switch would operate with your brakes. Some research would be needed to make sure.
http://www.tciauto.com/
__________________
_____________________________
Bryan
'99 Silverado 1500, 4.3, 5-speed, reg cab, short bed
'50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser.
'40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.
Last edited by S10Fan; 09-24-2009 at 09:08 PM.
|