|
Re: cutting the steering shaft.
I used the CPP kit it is desinged for the 60-62 kit, the REZ is not
as you can see it fits fine no major mods
this is how I cut my shaft.
I installed the gear then measured were to cut
hope this helps
__________________
1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes.
"Over, Around or through it... "
Last edited by slepysal; 09-26-2009 at 11:29 PM.
|