The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jonboy · 10-06-2009, 08:34 AM

If it was done right, you will need to replace the front springs, shocks, steering arm, and drag link. You will want to make sure the transfer case was not dropped, and you will need new rear U-bolts if blocks were used. I don't think the brake lines will be too big of a problem, just make sure they are routed out of the way. I would try to see if you could find someone with a stock truck that would like to trade for your lift, and swap it all over.

10-06-2009, 08:34 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Remove 6" lift kit If it was done right, you will need to replace the front springs, shocks, steering arm, and drag link. You will want to make sure the transfer case was not dropped, and you will need new rear U-bolts if blocks were used. I don't think the brake lines will be too big of a problem, just make sure they are routed out of the way. I would try to see if you could find someone with a stock truck that would like to trade for your lift, and swap it all over.