|
Re: Fraking stuck Spring bolt!
The bolt is rusted to the steel sleeve inside the spring bushing, It is spinning inside the rubber. You will need to use a sawsall or die grinder to cut either end of the bolt off, Then the spring will come out. You will have to buy a new bushing for that spring.
When you re-install, be sure to antisieze your bolts and this will never be a problem again.
__________________
1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels
1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels
|