The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Justins76 · 10-12-2009, 09:08 PM

I decided to replace my rotted out vent window weatherstripping. Big Mistake! After hours of struggling with the new weatherstripping i finally got it done. But then this happened. The vent window will not close. The top seems not far enough back for the angle of the window. I even tried removing the pivot rivet. No luck. Wont line up anyway I try. The vent appears to be installed in the same position from when I removed it. The screw that hold the top of the door isnt slotted so no adjustment available there. The window glass is all the way in the frame. Any ideas whats wrong? Thanks

10-12-2009, 09:08 PM	#1
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Vent window help. I decided to replace my rotted out vent window weatherstripping. Big Mistake! After hours of struggling with the new weatherstripping i finally got it done. But then this happened. The vent window will not close. The top seems not far enough back for the angle of the window. I even tried removing the pivot rivet. No luck. Wont line up anyway I try. The vent appears to be installed in the same position from when I removed it. The screw that hold the top of the door isnt slotted so no adjustment available there. The window glass is all the way in the frame. Any ideas whats wrong? Thanks Attached Images __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!