The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Wanting opinions on shaving the rocker panel pinch weld

**John Fabris** · 10-15-2009, 06:05 PM

No Pictures, but did cut 2 inches, weld, grind, cut 2 inches, weld, grind, blah blah, you get the idea. Other thing is to keep the drain vents, or slots so as you will still have a way for water to exit and not cause rapid rust.

10-15-2009, 06:05 PM	#18
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Wanting opinions on shaving the rocker panel pinch weld No Pictures, but did cut 2 inches, weld, grind, cut 2 inches, weld, grind, blah blah, you get the idea. Other thing is to keep the drain vents, or slots so as you will still have a way for water to exit and not cause rapid rust. __________________ John Fabris 67 C10 SWB