The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Burt4x4 · 10-21-2009, 10:08 AM

Back in the day when I had manual linkage to relocate my Zbar. I simply drilled a hole about 1" towards the firewall in the bracket that is mounted on the framerale. Then mounted the ball end to the new hole and cleared the header tube without causing any binding at the zbar. They were Hedmen Headers. Sorry no pics, my gallery is MIA at the moment.
Now I run Hydro, converted when I wedged in my 454

10-21-2009, 10:08 AM	#13
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: Just got new headers and don't fit!!! Back in the day when I had manual linkage to relocate my Zbar. I simply drilled a hole about 1" towards the firewall in the bracket that is mounted on the framerale. Then mounted the ball end to the new hole and cleared the header tube without causing any binding at the zbar. They were Hedmen Headers. Sorry no pics, my gallery is MIA at the moment. Now I run Hydro, converted when I wedged in my 454 __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks