The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 10-24-2009, 07:29 PM

Input shaft? Input is the same. You could even use the t350 convertor is you want. The rear output is different, you'll need a different yoke for the driveline. Yes X-member will have to moved almost 2''. I even think the cooler lines will hit in the same spot. Shorter vac line to the modulator and if you want passing gear, that will have to be wired in.

10-24-2009, 07:29 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,717	Re: Turbo 350/400 Column Linkage Input shaft? Input is the same. You could even use the t350 convertor is you want. The rear output is different, you'll need a different yoke for the driveline. Yes X-member will have to moved almost 2''. I even think the cooler lines will hit in the same spot. Shorter vac line to the modulator and if you want passing gear, that will have to be wired in.