The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*LILRED66* · 10-25-2009, 10:08 PM

You need the slip yoke for the 350, so it will mate with the tranny. You will need to have a drive shaft made or an original one modified.

10-25-2009, 10:08 PM	#3
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: driveshaft 1964 longbed You need the slip yoke for the 350, so it will mate with the tranny. You will need to have a drive shaft made or an original one modified.