The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

BONZEYE · 10-28-2009, 12:35 PM

Thanks for the comments. . The notch seems BIG cause i used 2x6 tubing. and in the V configuration it sticks up way higher. The plan was to put at least some 24" eventually. And the bumper lays about 6 inches further than the frame. So i figure when the bumper is grinded all the way down ill put some Titanium blocks on the frame and lay frame.

A big concern i have is what i am going to do for the fuel cell.

10-28-2009, 12:35 PM	#10
BONZEYE Registered User Join Date: Oct 2009 Location: SAlinas, CA Posts: 36	Re: BONZEYE's 86 C10 LONGBED Thanks for the comments. . The notch seems BIG cause i used 2x6 tubing. and in the V configuration it sticks up way higher. The plan was to put at least some 24" eventually. And the bumper lays about 6 inches further than the frame. So i figure when the bumper is grinded all the way down ill put some Titanium blocks on the frame and lay frame. A big concern i have is what i am going to do for the fuel cell.