Quote:
Originally Posted by hopkinschevelle
Good idea, how do you go about removing the air bag?
|
Take two cheap BIC pens, pull the ink tubes out, look on the sides of the steering wheel behind the airbag, you will see a small hole on either side. Stick the ink tubes in these little holes and push carefully, it will release two clips that hold the airbag in. Make sure you pull the airbag fuses, and give it about 30 min to make sure the capacitors have discharged.
Did you replace the hazard flasher unit? Or just the relay? My brother's 01 had this problem, where signals would not work, and if he pushed the hazard button the lights would light up solid with no flash. Replaced that unit and it fixed the problem.