|
Re: 2wd to 4wd.
You need to remove the front leaf spring hanger on the 4wd, which is also the radiator support mount bracket, and install it on the 2wd truck. You will need to swap steering boxes, and either measure the 4wd frame and cut a hole in your 2wd frame for the shackles, or cut the whole thing out and weld it in the 2wd frame. I plan on doing the second one tomorrow on my longhorn weather permitting. You will also need a 4x4 engine crossmember out of a 67-72 4x4 frame and put it in your frame. I have one if you need one.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|