The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jaros44sr** · 11-12-2009, 04:42 PM

Same thing happened to me on the '72, disc/drum. PO put the wrong m/c on it, and after much reading and questions asked. I found the problem. Even the counter guy (3 differant parts stores) kept giving me the wrong M/C. Once the board schooled me on the proper setup, I was able to go in there and know what I was looking for. Sooo, with all that being said, get the M/C with the large chamber in the front...

You've come to the right place for information from guys that know what they're talking about! These guys have helped me out alot. Hang around it only gets better with time

Same setup as 1949GMC

But, keep in mind, you may want to do the one ton upgrade at this point in time

11-12-2009, 04:42 PM	#7
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,856	Re: are my front/rear brake lines crossed? Same thing happened to me on the '72, disc/drum. PO put the wrong m/c on it, and after much reading and questions asked. I found the problem. Even the counter guy (3 differant parts stores) kept giving me the wrong M/C. Once the board schooled me on the proper setup, I was able to go in there and know what I was looking for. Sooo, with all that being said, get the M/C with the large chamber in the front... You've come to the right place for information from guys that know what they're talking about! These guys have helped me out alot. Hang around it only gets better with time Same setup as 1949GMC But, keep in mind, you may want to do the one ton upgrade at this point in time __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-12-2009 at 04:49 PM.