|
Re: Can you find the vibration???
So, I found out that the cab of my truck is a 2wd cab, the 2wd hump was cut out and retro fitted with a 4wd hump. Although this modification was done the transfer case was hitting the underside on the bed which led me to question the crossmember. After measuring the crossmember on my truck against a stock 4wd crossmember I found mine was an inch and a quarter short. I fabricated a spacer and fitted to the truck today, the vibration is significantly less noticeable. Almost not at all! I would say problem solved. There was also a broken motor motor mount, which was replaced today also.
Question though....
where can I find a 4x4 crossmember???
And thank you everyone for sharing your knowledge.
|