Quote:
Originally Posted by Alex1
Sorry I forgot to mention.
Get a good fuel pump like an Aeromotive a1000 I think it is - Its good quality and will give you all the fuel this combo needs - you will need an adustible fuel pressure regulator and a return to the tank.
Also a like others have mentioned, a cold air set up would help too.
Also you need colder plugs with a blower - I'm not sure if thats what you're using or not
Is that flywheel HP or RWHP your making? I wasn't sure.
|
I'm using AR3933 plugs. Flywheel HP.
Quote:
Originally Posted by Wild83C10
Yes the BOV would be located in that section of the pipe, but you need the aluminum pipe, not the rubber.
The BOVs aren't rated for certain boost levels it all depends on how much air you are pushing. A 50 mm BOV should be sufficient. I'm not exactly sure how to calculate the size.
Like Alex1 suggested the A1000 is a good pump and will work well with your combo.
It's so easy spending someone else money. Although I just bought a few of these same items.
|
Looks like I'll do the BOV first and then the regulator and pump. Can I cut out a section of the rubber and then add a piece of pipe in between with the BOV?