The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dwcsr · 11-24-2009, 07:46 PM

The c10 is 32 -33 depending on where you measure it. Even if the C50 is longer you can cut it down to size. Providing the shaft is 3/4" and not 7/8 or 1" you could use it.

11-24-2009, 07:46 PM	#4
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,131	Re: Column Size The c10 is 32 -33 depending on where you measure it. Even if the C50 is longer you can cut it down to size. Providing the shaft is 3/4" and not 7/8 or 1" you could use it.