The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ericpost · 11-26-2009, 12:46 PM

Here is a few pics of my not so stock set up. The bumper brackets are custom made from angle iron (not nearly as nice as VT's!) and I also beefed up the frame area as well with some angle iron. The class 4 recievers are mounted between the frame rails, the rear is out of a '97 Dodge 3/4, not sure what the front is out of. I like the look of them tucked right up there plus moving the winch is a nice option as well.

Also I guess I should mention the PO cut the frame horns off so I had a blank canvas to work with!

Here you go..

11-26-2009, 12:46 PM	#17
ericpost Registered User Join Date: Aug 2002 Location: New Hampshire Posts: 141	Re: Winch mount bumpers for a 70 Here is a few pics of my not so stock set up. The bumper brackets are custom made from angle iron (not nearly as nice as VT's!) and I also beefed up the frame area as well with some angle iron. The class 4 recievers are mounted between the frame rails, the rear is out of a '97 Dodge 3/4, not sure what the front is out of. I like the look of them tucked right up there plus moving the winch is a nice option as well. Also I guess I should mention the PO cut the frame horns off so I had a blank canvas to work with! Here you go.. Attached Images __________________ 72 GMC Jimmy, 350, sm465 np205 (getting a face lift) 64 Nova SS, 327 SC & gassed, TH350. (blowed it up) 84 HD FX frame,80 FL tins, evo with 85hp/90tq (wifes bike) 96 HD FatBoy evo with 102hp/100tq (mine!) KEEP NOTHING STOCK! Last edited by ericpost; 11-26-2009 at 12:54 PM.