The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Where do I wire electric choke up to in the fusebox?

GASWAGON · 11-29-2009, 03:05 PM

You can but you really should have it go to ign. fused, or install a inline fuse to be safe. Also use a volt meter and make sure you have 12 volts at the panel or the choke won't work properly. If the carb is new try the factory setting first.

11-29-2009, 03:05 PM	#3
GASWAGON AMERICAN IRON ADDICT Join Date: Oct 2007 Location: MA Posts: 299	Re: Where do I wire electric choke up to in the fusebox? You can but you really should have it go to ign. fused, or install a inline fuse to be safe. Also use a volt meter and make sure you have 12 volts at the panel or the choke won't work properly. If the carb is new try the factory setting first.