The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Flat 67 · 11-29-2009, 06:13 PM

After doing lots of research I replaced my non a/c heater blower motor in my 67 with a a/c heater blower motor. Supposedly, this is a common upgrade. But, when you do this, the fuse 10amp fuse has to be replaced with a 25amp fuse. My question is do I just pull out the 10 amp fuse in the fuse box and replace it with a 25amp in the same location and are there any other modifications needed? Just being cautious before I start frying wires. Thanks for the help.........Flat 67

11-29-2009, 06:13 PM	#1
Flat 67 Junior Member Join Date: Sep 2005 Location: Fresno,California Posts: 224	Heater Blower Fan Upgrade.... After doing lots of research I replaced my non a/c heater blower motor in my 67 with a a/c heater blower motor. Supposedly, this is a common upgrade. But, when you do this, the fuse 10amp fuse has to be replaced with a 25amp fuse. My question is do I just pull out the 10 amp fuse in the fuse box and replace it with a 25amp in the same location and are there any other modifications needed? Just being cautious before I start frying wires. Thanks for the help.........Flat 67 Last edited by Flat 67; 11-29-2009 at 06:24 PM.