|
Re: trailer btake control
Quote:
Originally Posted by Gray Ghost
There should be a separate harness for the controller. I have one that sits in my workshop waiting for the day I get trailer brakes on my trailer. Not sure where it plugs in though.
|
+1
Quote:
Originally Posted by SkylineNXS
I have a 00 sierra extended, so it may be different, but right behind the parking brake pedal there is a "black box" cover, if u remove that, i do believe that is where u are supposed to plug in, at least my aftermarket controller wires to this location...
Brad
|
+1
NBS GM's from 1999-2007 Classic with the tow package came with the harness to wire up an aftermarket brake controller. Splice the wires from your controller to the GM harness and plug into the black box behind your emergency brake pedal. Then put the fuse that was wrapped up with the harness in the under hood fuse box, and your done.
Sounds like you need the GM harness, it makes it very easy....
__________________
2002 Silverado 2500HD LB7 CCSB LT
EFI Live by Rob at ATP, Edge CTS Insight DSP 5 control, S&B CAI, PPE boost valve, Pro Fab AIH, AirDog II 165, PPE WIF sensor delete plug, 5" stainless exhaust, Cognito braces & HD tie rods, H2's 315/70 R17 BFG's
2004 Tahoe LT
2006 Silverado Z71 LS
1971 Chevy C10
Last edited by 1978steven; 12-02-2009 at 08:37 PM.
|