[68 TT]

Originally Posted by 78-5.3

i moved my brake light to from the fuel gauge over to where the speedometer is i think i used the used the 4x4 lock light for it i also re-pin the connector every thing works !! the elec. speedo, tacho, oil, temp all work great !!! for the time being i took apart the old fuel and oil gauge swapped the faces over to see if the repined gas gauge worked ,but im still looking for a factory left hand side lower gas gauge gas , that will fit out of a later 81-91 C/k truck the only thing is that i pulled off the camaro needle to replace it with the orginal fuel gauge needle but its not long enough to go into the spline of the camaro tacho i put the camaro needle back on but i had to reposition it a few times because it was showing the wrong RPM im concerned it may come off the spline i dont wanna push the needle to hard !!! i wanna repace it with a needle similar to the trucks gas/ speedometer one!!!!

Glad it's working out.

There were a couple needle designs on the Camaro gauges. I ended up liking the look of the smooth tapered needles on mine and am in the process of swapping out all the truck needles for the Camaro ones. I did paint the white portion of the needles orange and I like that a bunch more than the white needles.