The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Class of 69 · 04-21-2003, 11:17 PM

If your talking about play in the pinion shaft..no. If the yoke is loose on the pinion...may need to tighten the nut.. If pinion shaft moves that much..the bearing is most likely worn out. Would need to put a bearing and seal kit in it.. reshim the ring, and pinion lash.

04-21-2003, 11:17 PM	#2
Class of 69 Registered User Join Date: Mar 2003 Location: Stillwater MN Posts: 1,166	If your talking about play in the pinion shaft..no. If the yoke is loose on the pinion...may need to tighten the nut.. If pinion shaft moves that much..the bearing is most likely worn out. Would need to put a bearing and seal kit in it.. reshim the ring, and pinion lash. __________________ 69 GMC K10 ..some restoration required....still..