Re: Project "Mid Life Crisis Low Rider Burb"
So now its November and the wood is done so here we go on to the frame. I buy the cnotch from CPP and get that installed. Drilling out the rivots really is time consuming. I gave up the lease on my bottles so I dont have a torch. I tried the air chisel but that didnt work? I just grind them down then knock them out. I also get the rear end conversion kit and get the 89 rear end installed. New trailing arm bushings and 2in lowering blocks are installed. Thanks to reading VA72C10's build thread I saved lots of time on the centering of the rear to the wheel well. I flipped the trailing arm mounts also and the carrier bearing mount. It looks like the 1/2 inch plates behind the trailing arm mount works for me too. I sent the body to another shop to get it jammed and the firewall and the interior painted. All the insides of the doors, fenders tailgate,hatch are painted now. I went with 2008 Vista Blue Pearl................ford shhh!!!!! I looked at every blue on the planet and it was either the ford or Toyotas Nautical Blue and I couldnt put that on a Chevy.
|