The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How do I Remove Drive shafts, and eaton 3rd member

JimmyFloyd · 12-10-2009, 02:38 PM

Excellent. that's what I wanted to hear. i didn't want to have to remove the wheels to get the axles out as i want to keep it a roller. I will be chalking both sides of the wheel since it is on the trailer still. May hook some straps up to it too.

As for dropping the 3rd member, I am going to try and have a small pallet waiting to set it on, so that whomever wants it will be able to get it fairly easy.

Thanks again for the advice so far. This is VERY helpful.

12-10-2009, 02:38 PM	#13
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: How do I Remove Drive shafts, and eaton 3rd member Excellent. that's what I wanted to hear. i didn't want to have to remove the wheels to get the axles out as i want to keep it a roller. I will be chalking both sides of the wheel since it is on the trailer still. May hook some straps up to it too. As for dropping the 3rd member, I am going to try and have a small pallet waiting to set it on, so that whomever wants it will be able to get it fairly easy. Thanks again for the advice so far. This is VERY helpful. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3