The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bradf74 · 12-17-2009, 07:44 PM

For all those interested (or searching this subject months from now) it is a matco tools #9648. Took about 5 minutes. Just knock the threaded end of the remover tool into the seal and give it a couple turns to "bite" into the old seal. Use the bolt provided as a press to pull the old seal out that is now attached to the threaded end of the remover tool. Then use the installer to knock the new seal into place. Nothing to it.

12-17-2009, 07:44 PM	#18
bradf74 Registered User Join Date: Aug 2008 Location: Summit, MS Posts: 56	Re: TH 350 shift seal leaking..Tool? For all those interested (or searching this subject months from now) it is a matco tools #9648. Took about 5 minutes. Just knock the threaded end of the remover tool into the seal and give it a couple turns to "bite" into the old seal. Use the bolt provided as a press to pull the old seal out that is now attached to the threaded end of the remover tool. Then use the installer to knock the new seal into place. Nothing to it.