Quote:
Originally Posted by oldblue1968chevy
5 lug replacement axles are expensive too much for my budger 
So if im using71-72 setup I need 71-72 hardlines correct? I really dont wanna bend my own laying under the truck...so the prebent 71-72 lines will go right in?
71super, I really want braided..If Ima do it, ima try'n do it right $ (learned my lesson the 1st time around lol) when it warms up in the summer ima pull the front clip and wash scrape paint and freshen up my motor.
Ima wait. Found a 5 lug posi 373 rearend in town for 375$ its set up for coil springs..but is from a 60-66 model chevy 2wd |
No. Maybe. It depends.
Has your entire crossmember been changed out?
Or just the spindles out?
There's a tab welded to the crossmember in the spot where steel lines convert to rubber lines.
The 71-72 trucks have this tab on the
opposite side of the crossmember than what your truck has.
(Unless the entire crossmember has been swapped. I don't know what you have)
You will need to order pre-bent lines that are correct for the year of truck you have. If you order 71-72 lines you will need a tab welded on in that location, since they are different. (unless you swapped crossmembers)
I don't know whats been swapped on your truck.
Like I said, explain what you have to ECE and they will send you the correct parts.