The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

eric67m · 12-22-2009, 08:24 AM

With energy suspensions kit you must re-use or BUY NEW BOLTS. The other thing is you must re-use your metal tube spacers off of your truck. They go inside of the bumpers. The front is just a tube and the rear is a tube with a washer welded on the top. The rear one gets cut down to some dimension given in the energy suspension instructions. On my truck these were rusted enough that I could cut off the rubber mount to measure them and make new ones. I have dimensions here if you need them.

12-22-2009, 08:24 AM	#4
eric67m Registered User Join Date: Apr 2005 Location: Monroe, WA Posts: 298	Re: quick 4x4 body mount question With energy suspensions kit you must re-use or BUY NEW BOLTS. The other thing is you must re-use your metal tube spacers off of your truck. They go inside of the bumpers. The front is just a tube and the rear is a tube with a washer welded on the top. The rear one gets cut down to some dimension given in the energy suspension instructions. On my truck these were rusted enough that I could cut off the rubber mount to measure them and make new ones. I have dimensions here if you need them. __________________ 67 K10, lwb, fleetside, 327, 4spd, 205, cab and 3/4 frame swap, 14 bolt, big window, and a "rustoleum roll job"