The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How about some pics of your S10 conversion @ ride height

1952ssr · 12-28-2009, 10:26 AM

Well got in 10 hours of work on the '51 Saturday. Here are some pictures to get a better idea where my cab sits. About 5-5 1/2 inches off between frame and floor pan in the battery mounting hole. Notice in the second, hard to see it but there is a 3/4 piece of square tubing between the top body mount cup and original cab channel. Those brackets were made using the left over frame cut from the back and a s10 body mount bracket.

12-28-2009, 10:26 AM	#19
1952ssr Registered User Join Date: Nov 2009 Location: Gainesville Georgia Posts: 458	Re: How about some pics of your S10 conversion @ ride height Well got in 10 hours of work on the '51 Saturday. Here are some pictures to get a better idea where my cab sits. About 5-5 1/2 inches off between frame and floor pan in the battery mounting hole. Notice in the second, hard to see it but there is a 3/4 piece of square tubing between the top body mount cup and original cab channel. Those brackets were made using the left over frame cut from the back and a s10 body mount bracket. Last edited by 1952ssr; 05-14-2010 at 04:07 PM.