Quote:
Originally Posted by BLE 'BURBAN
Can you get a grip on the broken off extractor? If so get a a pair of vise grips on it, heat up the housing aorund the bolt to cause the metal to expand enough to allow you to unscrew the reaming portion of the bolt out.
OR....
Get a HELI-COIL SET that's the same size as the bolt holes are, drill the hole out with the supplied drill bit, tap it it out with the supplied thread tap and then insert the heli-coil.
|
i've tried vise grips theres not enough of the easy out sticking out to get a good grip on.